deeppolt.blogg.se - Kreg rip cut

#Kreg rip cut how to
#Kreg rip cut plus

Place an upper connector bar on top of a lower connector bar. Instead, I found it was easier to place the set screw on the Allen wrench and then thread it into the hole.

💡 TIP: The set screws are small and tricky to thread into the holes by hand. Thread the set screws into the connector bars. 📝 NOTE: I have the XL version, but my workshop is small, so I only used the two 28” guide rails for this tutorial.

#Kreg rip cut how to

How to Assemble the Kreg Straight Edge Guide For example, my circular saw requires a 7-¼” blade with a ⅝” arbor. These sizes are usually printed on the saw. 💡 TIP: Be sure to choose a blade that matches the blade size and arbor size of your saw.

Related: How to Change a Circular Saw Blade We’ll want to choose a blade for making rip cuts in the material that we’re cutting (plywood, MDF, etc.) Yes, the Straight Edge Guide can be used with the blade tilted to make bevel cuts. It’s designed to make straight, rip cuts. No, the Straight Edge Guide can’t be used to make angle cuts. It can be used to make bevel cuts with circular saws and jigsaws and dados with a trim router. It can also be used to cut ¼” and ½” material if it’s properly supported. The Straight Edge Guide is designed to make straight rip cuts on ¾” thick sheet material like plywood and MDF. What Can I Cut with the Kreg Straight Edge Guide?

The baseplate needs to be installed on the router.

Requires a slightly different setup when calibrating.

📝 NOTE: I’m using my DeWalt circular saw for this tutorial.

Works with saws with the blade on the left or right side.

The low profile of the Straight Edge Guide (⅜”) shouldn’t interfere with most circular saw motors.

The baseplate needs to have 1” to 5-½” between the blade and the edge of the baseplate.

Works with circular saws with a 5-½” blade or larger.

The Straight Edge Guide works with circular saws, jigsaws, and most trim routers with the baseplate attached. What Tools Can You Use with the Kreg Straight Edge Guide? And more importantly, it prevents the saw blade from cutting your workbench, or pavement/concrete when working on the ground. The foam board makes a great work surface for cutting large sheets of plywood and MDF. You will also need a piece of rigid foam board insulation. You will need to provide your own circular saw, jigsaw, or trim router.

#Kreg rip cut plus

The Straight Edge Guide XL includes all of the items above plus two 24” Guide Rails and it increases the number of Paired Connector Bars from two to six. An expansion pack is available if you want to make the cutting capacity even longer. The Straight Edge Guide is available in two lengths, the Straight Edge Guide has a 4-foot cutting capacity and the XL has an 8-foot cutting capacity. One difference between the Rip-Cut and the Accu-Cut is the Straight Edge Guide clamps to the workpiece.

And unlike their other cutting solutions, it can also be used with a jigsaw and a trim router. The Kreg Straight Edge Guide rounds out the family of cutting tools by turning a circular saw into another accurate way to make long rip cuts. Related: Kreg Crosscut Station Review (It’s Not for Everyone) Think of it as a miter box for your circular saw. Their latest cutting solutions include the Crosscut Station which turns a circular saw into an accurate way to make crosscuts and miter cuts. Related: 4 Ways to Make Straight Cuts With a Circular Saw And the Kreg Accu-Cut that turns a circular saw into a track saw. Previously they released the Kreg Rip-Cut which attaches to a circular saw to make straight, accurate rip cuts. Kreg Tool has recently added several new cutting solutions to their family of tools. My Review of the Kreg Straight Edge Guide.How to Use the Kreg Straight Edge Guide.How to Calibrate the Kreg Straight Edge Guide.How to Assemble the Kreg Straight Edge Guide.What Can You Cut with the Kreg Straight Edge Guide?.What Tools Can You Use with the Kreg Straight Edge Guide?.